BUY DIRECT FROM MANUFACTURER. 750 SQ FT MINIMUM.

Mechanical Standing Seam

  • Product Specifications

    Specifications


    Material Type:
    Standing Seam Metal Panels

    Rib Height:
    1.75"

    Available Gauges
    22,24

    Substrate:
    AZ50 Minimum (aka Galvalume®/Zincalume®)

    Fasteners:
    Concealed

    Panel Length:
    1' to 52'

    Recommended Minimum Roof Slope:
    3/12

    Installation
    Can be installed over an open purlin system or a solid substrate.

    Overall Width
    12"-20"

    Applications
    Residential
    Commercial
    Agricultural
    Interior
  • Features & Benefits

    Features & Benefits of Standing Seam Metal Roofing

    • High Seams – The weak point in any roof and a potential entry point for moisture are at its seams. Higher seams, also called “ribs”, are raised above the level of the roofing panel. Moisture and water will be kept away from entering the interior of the building, and will make water run properly to the roof drains.
    • Weathertight – Clip fastened panels are one of the most durable and weathertight roof systems available. The clip is fastened to the roof deck so that the panels are allowed to “float.” This helps to ensure that the system will maintain its water tightness much longer, and also its aesthetics, as oil canning will be less of a concern. It allows for the full expansion and contraction of the metal.
    • Fewer Seams - Because the metal panels run unhindered from the top to the bottom of the roof, not only are there no horizontal seams but, in total, the roof has a fewer number of seams.
    • Corrosion and Rust Resistant – Our metal roofing and siding panels and sheet steel products are coated with Galvalume®/Zincalume® - an aluminum-zinc alloy coating with extraordinary outdoor corrosion resistance.
    • Durable - Metal Roofing coated with Galvalume®/Zincalume® will have an exceptionally long life expectancy.
    • Rot Resistant - Since metal is an inorganic material, unlike wood, it does not rot - making it the best choice in roofing material by builders and architects alike.
    • Pest and Termite Resistant - Bugs, pests, and termites cannot penetrate through metal materials making a corrugated metal roofing system your best defense against unwanted creatures.
    • Fire Resistant - Metal roofs are noncombustible and have a Class A fire rating. Class C rating when applied over a combustible material such as wood shingles.
    • Wind Resistant - Metal roofing can withstand powerful wind gusts.
    • Lightweight - Lightens the load in installation and reduces the load bearing weight on support walls and beams.
    • Stylish – Available in various colors and can be ordered in a variety of premium specialty finishes. Standing seam roofs are perfect for certain types of contemporary or country-style houses. Due to the smooth, straight lines, these roofs give your house an "industrial" feeling, yet with a modern flair.
    • Energy Efficient - Metal roofs with a "Cool" paint finish reflect solar radiant heat, which can help reduce cooling costs.
    • Eco-Friendly - Metal roofing is made from recycled content. Corrugated roofing panels are also recyclable at the end of their life as a roof. In contrast, most shingle tear-off waste ends up as part of the building-related waste stream - up to 20 billion pounds per year.
  • Install Guide

    Install Guide for Download

    For more detailed information, please feel free to download the available documents below.

    Install Guide - Western Lock Standing Seam

  • Trim/Flashings

    Trim and Flashings

    Please click here to see available trim and flashings for this product.
  • Clip Detail

    Clip Detail - Western Lock Standing Seam

    For more detailed information, please feel free to download the available documents below.

    Clip Detail - Western Lock Standing Seam
  • Engineering Info

    Engineering Info Request

    Please call for more information 1-855-426-7836 or email us at sales@paintedrustedroofing.com.
  • CAD Details

    CAD Drawings for Download

  • Spec Sheet

    Spec Sheets

    Please Call or Email for Spec Sheets.
  • Color Charts
  • Paint Warranties/Specs
  • Solar Reflectivity Index

    Solar Reflectivity Index

    Standing Seam Solar reflectivity Index

Copper Mechanical Standing Seam Metal Roofing Panel

Standing seam roofing is considered one of the most durable and maintenance-free type of metal roofing materials on the market. A standing seam metal roof provides energy reduction benefits without sacrificing style. The Clips and screws fasten the panels tightly to prevent leaks and are concealed to give the appearance of a sleek and streamlined finish. In fact, standing seam provides a contemporary, distinctive look that will complement many home styles. This is the most common type of metal roofing used for both commercial and residential. Once installed, its dramatic shadow lines run continuously from ridge to eave, accenting the pitch and plane of every roof angle.


ORDERING INFORMATION

Excellent customer service is important to us. When you place your order with Western States Metal Roofing you can expect the following:

    • Knowledgeable Sales Associates - Helpful and friendly sales associates that will answer all of your questions.
    • Made to Order Panels - We cut your metal roofing and metal siding panels to the exact lengths needed.
    • Fast Turnaround - Typical two week maximum lead times. However, if you need it quicker, we normally can accommodate just about any completion schedule.
    • Shipping Convenience - We have route trucks that service anywhere in the USA and Canada.
    • Affordable Shipping - Immediate and inexpensive shipping.

You May Also Be Interested In These Products:

Real Rusted Roofing
Rusted Roofing is produced in two different finishes: A606-4 (aka Corten) or Bare steel. Available panels include corrugated, standing seam, R-Panel, flush wall & more.
Streaked Series
There Are No Other Paint Prints That Even Come Close To The Authenticity Of The Streaked Series. It Is Designed Specifically For 7/8" Corrugated And Is A Pre-Painted Finish That Is Available In 4 Different Color Replications: Orange/Brown Rusted Roofing, Aqua Green/Brown Copper, Blue/Green Copper, Weathered Galvanized With Orange Rust Streaks
Pre-Painted Metal That Looks Weathered Gray
Metal roofing that looks weathered and gray. This pre-painted metal looks like a dull gray galvanized finish. These colors are both durable and stunning to look at.
Pre-Painted Metal That Looks Patina'd Copper
Why pay for an expensive copper roof ? Metal roofing and siding that has been pre-painted to look like patina'd copper is a growing favorite among architects and builders. Huge cost savings when compared to real copper.
Painted To Look Like Galvanized With Orange or White Rust Spots
Galv-Ten Robust is a color that looks like a weathered galvanized and has white rust spots throughout. Streaked and Speckled Galvanized Rust look like a really old galvanized panel that has begun to get orange rust streaks or spots.
Dark Colored Matte Finishes And Dark Bronzes
The latest trend in architecture is the use of dark matte finishes for metal roofing/siding. Our two newest colors Black Ore Matte and Matte Black will give your house a beautiful and unique look.. We also carry Dark Bronze and Medium Bronze PVDF colors.
Bonderized®
Bonderized is also referred to as Paint Grip. It is a product that looks like an old weathered steel. This is NOT a paint finish. Available in roofing, flats, and coil.
rezibond metal roofing panels
Rezibond®
ReziBond® Coating Looks Like Gray Gun Metal. This is NOT a Paint Finish. Available in Metal Roofing, Flats, and Coil.
Vari-Cool®
VARI-Cool Color Changing Paint System. This Exotic Paint System Is Unlike Anything You Have Ever Seen. 17 Different Colors - Request A Color Chip.
Standard Painted & Galvalume®
Large Color Selection. Great Paint Warranty. Excellent Pricing and Quick Lead Times. Available In Metal Roofing, Flats, and Coil.
Flat Sheets/Coil
Coil and Flat sheets can be processed to any width or length. Shop our huge selection of different gauges and widths.
Trim and Flashings
Flashing and trim available in steel with coordinating finishes and colors for your residential, commercial, industrial or agricultural metal roofing project.
Metal Deck
Roof deck and floor deck in stock. Huge selection of gauges, lengths, and metal decking profiles. Immediate availability. Buy Now.
Metal Carports
Heavy duty inexpensive DIY metal carports and RV shelters. Large selection of shelters and carports for all of your storage needs. Route trucks servicing the entire country.
Purlins
Metal Purlins and Cee Channel are in stock. Cee Purlins and Zee Purlins. Galvanized and Red Prime Painted. Immediate availability.
Galvanized Square Tubes
Galvanized square tube in stock in 14 gauge at many different lengths. Galvanized tube used for metal fence posts, metal carports, deck posts, panic bar gates, or building supports.
Mechanical Standing Seam
Pre-Painted Metal That Looks Like Copper
Pre-Painted Metal That Looks Like Copper
Metal roofing that has been pre-painted to look like copper is a growing favorite among architects and builders. Huge cost savings when compared to real copper.
Shop now
R Panel and PBR Panel
R Panel and PBR Panel
R-Panel is the nicest metal roofing panel for the least amount of money. Ideal for pre-engineered metal, post-frame, and agricultural buildings. Made to your specific sizes.
Shop now
7/8" Corrugated
7/8" Corrugated
7/8" corrugated metal roofing has deep wavy corrugations that look stunning on your metal roof. Exposed fasteners.
Shop now
Western Rib®
Western Rib®
Ribbed 7.2” exposed fastener panels offer wider coverage and it's trapezoidal design makes this our strongest panel. Exposed fasteners.
Shop now
Western Reveal®
Western Reveal®
Mix and match different reveals, face sizes, and widths. Modern design with 1", 2" or 3" reveals. Horizontal or Vertical Installation.
Shop now
T-Groove®
T-Groove®
1" Deep Flush Panels for use in wall, fascia and soffit applications. Rounded interlocking leg and concealed fasteners improve appearance and strength. Made to your specific sizes.
Shop now
Western Wave®
Western Wave®
This remarkable rigid wall panel with concealed fasteners offers a distinctive look with bold shadow effects that emphasize the panels unique rib profile. Ideal for mansards, equipment screens and walls.
Shop now
3/4 Hard Copper Flats<br>16 OZ and 20 OZ
3/4 Hard Copper Flats
16 OZ and 20 OZ
Copper flat sheets can be processed to any width or length. Shop our huge selection of different gauges and widths.
Shop now
3/4 Hard Copper Coil<br>16 OZ and 20 OZ
3/4 Hard Copper Coil
16 OZ and 20 OZ
Copper coil can be processed to any width or length. Shop our huge selection of different gauges and widths.
Shop now
Call Us!
Request A Quote
Request A Color Chip